ThermaSol DS-650
Day Spa Series 20kW Steam Bath Generator
Engineered for day spas and hotels, the ThermaSol DS-650 caters to up to 4 steam shower enclosures with combined dimensions of up to 2600 adjusted cubic feet (ACF).
Tailored to meet the demands of professional day spas and resorts, the DS-650 generator boasts high-performance and low-maintenance features. Constructed with durable stainless steel both internally and externally, this unit guarantees years of dependable operation. The split-tank design enhances the longevity of the generator.
With the included steam distribution system module, you have the flexibility to deliver steam to each room independently or simultaneously.
Features:
- Industrial grade, serviceable heating element
- Non-pressurized vessel
- Operates two, three, or four steam room environments
- Integral drain pan with 3/4" NPT fitting
- Stainless steel design inside and out
- Durable electronic components
- Can be installed up to 50 feet from the room
- Hardware Kit provided
- Large capacity tank size
- CSA/CUL listed
- ASME safety valve
Includes:
- 1 Generator
- In-Room Controls (2,3, or 4)
- Commercial Steamheads (2,3, or 4)
- Installation manual
- Limited Warranty
Specifications:
Model |
DS-650 |
Minimum Adjusted Cubic Feet |
1300 |
Maximum Adjusted Cubic Feet |
2600 |
Kilowatt Rating (KW) |
20 KW |
Shipping Weight (Lbs.) |
46 lbs |
AC Voltage |
240V AC |
Phase |
Single Phase |
Nominal Amperage |
2 Circuits, 46 Amps Each |
Recommended Protective Device |
2 Circuits, 50 Amps Each |
Recommended Minimum Copper Wire Supply |
2 Circuits, 8 AWG Each |
Water Supply Connection |
3/8" NPT |
Generator Steam Line Connection |
1/2" NPT |
Steam Head Connection |
1/2" NPT |
Safety Relief Valve Connection |
3/4" NPT |
Safety Relief Valve PSIG |
15 PSIG |
Control "Rough In" Cut Out |
1-1/16" |
Generator Control Connection |
6 Pin, Snap-In Connector |
Generator Control Cable |
50', 6 Conductor, 22 AWG, Shielded Cable |
Width |
18-3/4" |
Depth |
13-3/4" |
Height |
16" |